Himkor LSP

Light Surface Projection Technology for Windows and Marble

Technology Overview

Himkor LSP (Light Surface Projection) is an innovative technology that transforms windows and marble surfaces into high-quality projection screens. This advanced solution enables the creation of interactive displays on glass and stone surfaces without the need for physical screens or complex installations.

The technology is designed for both temporary and permanent installations, making it ideal for retail spaces, architectural applications, museums, and commercial facilities where aesthetic appeal and functionality must coexist.

Windows Specifications

Application Requirements

Glass Surface

  • Standard window glass (float glass)
  • Thickness: 3mm to 20mm
  • Surface must be clean and dry
  • No special glass treatment required

Material Consumption

  • 80-100 g per 1 m² of glass surface
  • 1 liter covers 10-12 m²
  • Consumption depends on surface texture

Application Method

  • Applied by painting method using standard roller
  • Thin layer application recommended
  • Uniform coverage without gaps
  • Drying time: 12-24 hours

Visual Properties

  • Visually transparent after complete drying
  • Light uneven roughness creates water-flowing effect
  • Maintains glass transparency
  • No visible coating from outside

Technical Specifications for Windows

Projection Quality

High-quality image projection with standard projectors (2500-5000 lumens recommended)

Viewing Angle

Wide viewing angle up to 160 degrees for optimal visibility

Removability

Can be completely removed by lifting the edge, leaving no traces or damage

Durability

Suitable for both temporary and long-term installations (up to 5 years)

Temperature Range

Operational temperature: -20°C to +60°C

Interactive Capability

With UV frame, becomes interactive touch surface responding to finger or stylus

Window Application Process

1. Surface Preparation

Clean the glass surface thoroughly with glass cleaner. Ensure the surface is completely dry and free from dust, grease, or any contaminants. Mark the work area using protective painter's tape.

2. Application

Apply the LSP composition using a standard roller, dipping directly into the container. Apply in the thinnest possible layer, ensuring uniform coverage across the entire marked area without gaps or empty spots.

3. Drying

Allow the coating to dry completely (12-24 hours depending on temperature and humidity). Remove protective tape immediately after application. The screen is ready for operation after complete drying.

4. Projection Setup

Position the projector at appropriate distance (typically 1.5-3 meters depending on screen size). Adjust focus and keystone correction. For interactive functionality, install UV frame around the perimeter.

Marble Specifications

Application Requirements

Marble Surface

  • Natural marble or marble-like surfaces
  • Polished or honed finish
  • Surface must be clean and free from sealers
  • No special surface treatment required

Material Consumption

  • 100-120 g per 1 m² of marble surface
  • 1 liter covers 8-10 m²
  • Slightly higher consumption than glass due to porosity

Application Method

  • Applied by painting method using roller or brush
  • May require multiple thin layers for porous surfaces
  • Ensure complete coverage of marble texture
  • Drying time: 24-48 hours

Visual Properties

  • Maintains natural marble appearance
  • Transparent coating preserves stone aesthetics
  • Enhances marble's natural texture
  • No visible film from normal viewing distance

Technical Specifications for Marble

Surface Compatibility

Compatible with natural marble, travertine, and marble-like composite materials

Projection Quality

Excellent image quality with enhanced contrast on marble surfaces (3000-6000 lumens recommended)

Durability

Long-term durability suitable for permanent installations in architectural applications

Weather Resistance

Suitable for both indoor and outdoor applications with proper surface preparation

Removability

Can be removed without damaging the marble surface, though may require more care than glass

Maintenance

Low maintenance requirements, can be cleaned with standard marble cleaning products

Marble Application Process

1. Surface Preparation

Clean marble surface thoroughly. Remove any existing sealers or protective coatings. Ensure surface is completely dry. For outdoor applications, check weather conditions (apply in dry conditions, temperature 10-30°C).

2. Application

Apply LSP composition using roller or brush. For porous marble, apply first thin layer and allow partial drying before applying second layer if needed. Ensure complete coverage of the marble surface including texture variations.

3. Drying

Allow complete drying (24-48 hours). Protect from moisture during drying period. For outdoor applications, ensure no rain or moisture exposure during first 48 hours.

4. Projection Setup

Position projector for optimal image quality. Marble surfaces may require slightly higher projector brightness. Adjust for natural marble color variations to optimize image contrast and visibility.

Common Technical Specifications

Projector Requirements

  • Standard projector compatibility
  • Recommended brightness: 2500-6000 lumens
  • Resolution: Full HD (1920x1080) or higher
  • Projection distance: 1.5-5 meters depending on screen size

Environmental Conditions

  • Operating temperature: -20°C to +60°C
  • Storage temperature: +5°C to +30°C
  • Relative humidity: 30-80%
  • Suitable for indoor and outdoor use

Safety & Environmental

  • Ecologically safe composition
  • Non-toxic and safe for humans
  • Biodegradable when removed
  • No negative environmental impact

Interactive Features

  • Optional UV frame for touch capability
  • Responds to finger touch
  • Stylus support available
  • Multi-touch capability

Applications

Windows Applications

Retail store windowsShopping mall displaysMuseum exhibitionsCorporate lobbiesRestaurant windowsHotel entrances

Marble Applications

Architectural facadesInterior wallsMonument displaysLuxury retail spacesCultural institutionsPublic buildings

Key Advantages

No Surface Modification

Does not require drilling, cutting, or permanent modifications to windows or marble surfaces

Easy Removal

Can be completely removed without leaving traces, damage, or requiring chemical agents

Cost Effective

Significantly lower cost compared to installing physical displays or LED screens

Energy Efficient

Reduces energy consumption compared to traditional display solutions

Aesthetic Preservation

Maintains the natural beauty and transparency of glass and marble surfaces

Flexible Installation

Suitable for both temporary promotional displays and permanent architectural installations